BRIDGER SCIENTIFIC heat transfer performance monitoring

Product Info

DATS-III FOULING MONITOR SYSTEM
Principle: The DATS-III Fouling Monitor utilizes the latest in microprocessor technology to simulate condenser / heat exchanger environment on a fluid side stream through a controlled tube section.

By matching the tube material, heat flux, and flow rates to an actual process, the DATS-III is able to provide vital information regarding performance degradation, and economic loss due to fouling. Calibrated temperature probes within the DATS heat exchanger accurately measure both fluid and heater temperatures, and is used along with power input to calculate the heat transfer. All heat transfer data is then provided as analog output signals to tie in with customer equipment.

Measurements and Controls:

Heat Flux Wall Temperature
Fluid Velocity
Fluid Temperature
Block Temperature
Heat Transfer Resistance
 
RS-232 and analog communications interfaces

 

Analog Output and Control:

Analog Outputs Proportional To:

Water Temperature [32 - 280 °F]
Block Temperature [32 - 280 °F]
Wall Temperature [32 - 280 °F]
Flow Velocity [ 0 - 13 ft/sec]
Heater Power [0 -4,778 BTU/Hr]
Heat Transfer [-5.4-4 to 2.271-2 Resistance Hr-°F-ft2/BTU]

Analog Control For:

Heater Power [0 -4,778 BTU/Hr]
Flow Velocity [ 0 - 13 ft/sec]

 

Specifications:

AC Power: 120 or 240 VAC, 50/60 Hz Maximum
Heat Flux: 50,000 BTU/hr•ft2
Maximum Fluid Temperature: 180 °F Flow velocity Range: 0.5 to 10 ft/sec.
Tube Specifications: Any commercially available alloy
Outside Diameter: 14mm; 5/8" to 1"
Wall thickness: 0.028" to 0.134"
Environmental Resistance: Plastic sealed enclosure, stainless steel and aluminum exterior
Wetted Components: CPVC, EDPM diaphragm PVDF paddlewheel, Titanium pin, tube material

 

DATS™-III Fouling Monitor System $ 9,500.00

Price Shown is for a single unit purchase - Multiple Unit discounts are available.

Click here to request additional info regarding your particular application.


Bridger Scientific Inc
PO Box 704, 114 State Road B-7
Sagamore Beach, MA 02562
Phone 508-888-6699 Fax: 508-888-5919
Schlott@meganet.net or info@bridgersci.com
© Bridger Scientific 2005